The differences between air-cooled engines and water-cooled engines are as follows:1. Working temperature: The suitable working temperature of the cylinder wall of an air-cooled engine is 150-180°C, while the suitable working temperature of the cylinder wall jacket of a water-cooled engine is 85-95°   Read More>

Cleaning method of diesel engine filter: 1. The air filter should be cleaned every 50-100 hours, and dust on the surface can be brushed off with a soft brush. 2. For oil bath air filters, clean the filter element with clean diesel every 100-200 hours. 3. The oil filter is cleaned by mixing oil, kerosene and diesel as cleaning oil.   Read More>

Fault manifestation: The diesel engine speed is unstable and the speed drops too much when the equipment is working.Analyze the reasons: 1. Oil leakage and air leakage in the oil inlet and return pipes; 2. Blockage of the diesel filter element; 3. Insufficient fuel supply and poor diesel quality.Sol   Read More>

Fault phenomenon: The diesel engine starts normally and works normally at high and low idle speeds. When the equipment is under heavy load, the speed drops seriously, the speed drops to about 1100~1300rpm, and the vehicle speed is also low, but it returns to normal after working for a short period o   Read More>